C01842 Crowcon Crowcon Gas Detection Harness Plate for Multigas Monitor
Description
Crowcon Gas Detection Harness Plate for Multigas Monitor
The product with part number C01842 (Crowcon Gas Detection Harness Plate for Multigas Monitor)
is from company Crowcon and distributed with basic unit price 38,01 EUR. Minimal order quantity is 1 pc.
Accessory TypeHarness Plate For Use WithMultigas Monitor Product Details Gas Detection: Crowcon Tetra The Tetra range of multi-gas personal detectors is ideal for users working in hazardous or confined environments with potential exposure to a range of toxic and flammable gases. 2, 3 or 4 gas versions available (Flammable FL, Oxygen O2, Hydrogen Sulphide H2S and Carbon Monoxide CO)Easy to use single button operation with clear display guidance through operationRobust – tough plastic construction with flexible internal assembly to resist shock and vibration, plus an overmoulded rubber layer for additional protectionEasy to read backlit graphic display Indications of operating status can be viewed at a glanceFully interchangeable intelligent sensor modules90dBA audible alarmBright red/blue visual alarmInternal vibrating alarm2 levels of instantaneous alarmTime weighted average alarm for 8 hours and 15 minutes averagesPeak level recallLiON rechargable battery gives full 12 hours operation30 day countdown warning for calibration due dateWater and dust resistant to IP65IR link for RS-232 Dimensions 122 x 128 x 57mm Wt.498g Gas Range Alarm Flammable 0-100% LEL 20% LEL Oxygen 0-25% 19//23.5% Hydrogen Sulphide 0-50ppm 5ppm Carbon Monoxide 0-500ppm 30ppm Typ. response times Flammable 20s, Toxic Gas 20's, Oxygen 10s Audible alarms 90dBA @ 30cm Visual alarms Dual Colour red/blue flashing LED pair in gas Vibrating alarm Internal vibrating alarm Display 128 x 64 graphic LCD with backlight, giving simultaneous display for all gas channels. Graphic symbols for battery (with proportional indication of remaining operation time), pump operation, healthy operation or fault warning. Start up indication when calibration is due within 30 days, calibration overdue or service is required Display mode Normal display for continuous real time gas Datalogging Event logging Sampling Hand aspirator or internal electric sampling pump Op. temp. range -20° to 55°C, 0-99% RH European safety stds. EN50014, EN50020, EN50018 Note Charger, 466-8464, must be ordered separately. Supplied with An integral belt/pocket clip. Gas Detection: Crowcon Tetra
Following Parts
Random Products
(keyword C01842 Crowcon Crowcon Gas Detection Harness Plate for Multigas Monitor)
